Quantcast
Channel: SCN : Popular Discussions - SAP Process Orchestration

SSSLERR_PEER_CERT_UNTRUSTED

0
0

Hi,

 

We recently upgraded the kernel and sap cyrptolib on one of our PI sysems (7.11 SP6 Dual Stack. CommonCryptoLib 8 Version 8.4.34.

 

We have three vendors, all with untrusted certificates, who we cannot communicate with any more. When we test the RFC connection we receive the following error.

 

 

 

[Thr 3085] SSL API error

[Thr 3085] Failed to verify peer certificate. Peer not trusted.

[Thr 3085] 0xa0600203   SSL   ssl_verify_peer_certificates

[Thr 3085] Peer not trusted

[Thr 3085] 0xa0600297   SSL   ssl_cert_checker_verify_certificates

[Thr 3085] peer certificate (chain) is not trusted

[Thr 3085] <<- ERROR: SapSSLSessionStart(sssl_hdl=1184803f0)==SSSLERR_PEER_CERT_UNTRUSTED

[Thr 3085] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-102): SSSLERR_PEER_CERT_UNTRUSTED {0002e2b6} [icxxconn_mt.

 

The connections were working prior to the upgrade. The vendors certificates are stored in the NWA Certificate store (we don't use STRUST) and have not changes.

 

There is nothing wrong with the certificate OR the RFC destination. I have searched SCN without a relevant hit. Can anyone help?


Database-ECC(Proxy)-Database Synchronous Communication

0
0

Hi Experts,

 

we are working on Database-Ecc(Proxy)_Database synchronous communication .

 

1) Here we created all ESR and ID objects.

2) We are able to send data to ECC successfully

3) We are not able to  pick the response from ECC

 

Please find below screen shots.

 

proxy2.JPG

 

proxy3.JPG

 

proxy1.JPG

 

proxy4.JPG

 

And please find below screen shots of ABAP code for inbound proxy. if we miss any thing on please let me know.

 

proxy5.JPG

proxy6.JPG

proxy7.JPG

proxy8.JPG

proxy9.JPG

 

Please help me need full.

 

 

 

 

Thanks,

Raju

Unable to end Bpm process with error

0
0

Hi,

 

I have a scenario where there is a search interface which calls create interface if search count is 0 or calls update interface if search is 1. There is a case where search returns count as 2, in this case the process should end in an error.

 

Can anyone please let me know how to end NetWeaver BPM process in error.

 

 

 

Thanks & Regards,

Hamsa

Unable to deploy the iFlow in NWDS

0
0

Hi Experts,

 

Currently we are working on SAP PI 7.31 SP11 single stack and I have downloaded nwds-extsoa-7.3-EHP1-SP13-PAT0009-win32 version but the deployment of iFlow getting failed due to the same reason as in blog http://scn.sap.com/thread/3871645 can you please suggest which version to NWDS to be installed ? Please find the snippet showing version of PI installed.

 

fed.JPG

 

 

Thanks,

Naveen.

Communication error PI to BPM

0
0

Hi All,

we're encountering a communication problem into a BPM scenario.

We're trying to trigger a communication between our BPM and an iFlow developed on Netweaver Developer Studio.

 

The PI flow is File to SOAP (XI 3.0). We would like to start the BPM flow as soon as a file is delivered from PI.

 

As you can see in the following screen, the scenario is very simple:

 

BPM1.PNG

we have associated the inbound Service Interface (related to the target Business Component of the flow) to the trigger of the Start Event, a human interaction with a web dynpro in which we want to show/approve/reject our data, and finally an End Event with no interface associated.

 

the iFlow is the following:

 

iflow.PNG

The Service interfaces (Outbound and Inbound) has the same Message Type associated and are configured as XI 3.0 stateless.

The mapping contains simple move of values.

The communication channel sender polls on a local folder on PI in order to catch a file with the structure defined into the data type and should send the data through the SOAP communication channel to the receiver structure (mapped into the Data Object created in the BPM).

 

But, once we start the Communication channel sender, we encounter the following error:

 

Delivery of the message to the application using connection JPR failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. FaultException: com.sap.aii.proxy.xiruntime.core.ESPXISystemFaultException: Error encountered  during processing of XI request message in inbound ESP; Hint: com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException:
Unexpected uriID '/{http://abc.com/BPM_process_demo}Anagrafica_async_in_SI'. Found:  BindingData 'null', interfaceMapping 'null' interfaceDefinition 'null'

 

We tried to search for some help on the portal but the only suggestion we found has been already implemented.

 

Any other suggestions?

 

Thank you very much.

Regards.

 

Andrea

ESR Object does not appear in the PO.

0
0

Hi Experts,

 

We are in the midst of migrating our PI 7.11 to PO 7.4. I tried to export the objects of one of the interface from the production server in PI and import the TPZ file into the development server in PO 7.4. However, the objects does not appear at all in the namespace in the PO. I have tried the below steps but it is not helping. Any idea how to solve this? Hope to get it solved. Thanks.

 

Steps taken:

  1. Checked in the cache status overview of the ESR and it shows that it was imported successfully.
  2. Refresh the SLD Data Cache and re-import it again.

 

Regards,

Shawn

Post Installation Activities in PO 7.4

0
0

Hi Experts,

 

 

      I have installed PO 7.4 package in windows server 2008 with DB6 database. Please anyone explain me what are all the post installation  i need to carry out to get my system ready...

 

Regards,

Vetri

Process Orchestration Install

0
0

Could someone please help me. I would like to see a guide on the hardware and os requirments for a PO 7.31 installation dual and single. Please point me to a thread or document or write it here

 

regards

 

vince


Best transport options in SAP PI 7.31 single stack

0
0

Hello everybody,

 

We are going to finished the installation of new SAP PI 7.31 + BPM (SAP PO) single stack. I have a doubt refered how to choose the correct architecture of transports.

 

  Before it was possible to choose several types of installations (File transport or CTS+ or CMS).

  For me CTS+ is the best choice for transport PI objects but now I think the best installation should be CTS+ and NWDI. NWDI for transport iflows and module adapters and CTS+ for standard PI Objects.

 

  At this point I have the following questions:

 

  -  Is posible to use CTS+ in NWDS?

  -  Must CTS+ be configured in SAP Solution Manager?

  -  For integration flows, how can I transport those objects? If they are java deployed objects I supposed that NWDI should be used. Is ok this assumption?

 

I didn't found any information in SDN.

 

Best regards and thank you in advanced

Iván Prieto

Use of Mail Adapter in PO 7.40

0
0

Hi Expert,

I configured in my IFLow the use of Mail Adapter and works fine, but now I have the need to extend my interface also use the CC field in the email.

I have already add the parameter CC in my IFlow and in my Operation Mapping as I already do for the parameter TO and this part is ok or that's how it seems.

 

IFLow.jpg

The problem/error appears in the java mapping when I manage this new parameter and insert it in the structure, see code below:

 

...

      String to = getInputParameters().getString("TO");

      String cc = getInputParameters().getString("CC");

...

      this.rootElement = new XMLElement("ns1:Mail", XMLElement.XML_TYPE_ELEMENT, null);

      this.rootElement.addAttr("xmlns:ns1", "http://sap.com/xi/XI/Mail/30");

      if ((sid.equals("I3O")) || (sid.equals("K3O"))) {

     this.rootElement.addElement("Subject", 1, " Lieferterminmeldung fuer fehlerhafte Auftraege - " + sid);

      } else {

     this.rootElement.addElement("Subject", 1, " Lieferterminmeldung fuer fehlerhafte Auftraege");

      }

      this.rootElement.addElement("From", 1, "a@a.com");

      this.rootElement.addElement("To", 1, to);

      this.rootElement.addElement("Cc", 1, cc);

      this.rootElement.addElement("Content_Type", 1, "text/html");

      this.rootElement.addElement("Content", 1, content);

...

 

The error that I found on Message Monitor is:

ErrMail.jpg

Could someone help me  figure out where is my mistake?

 

Thanks in advance for any help





Latest Images